The 74HC393D652 is a dual 4-bit counter from NXP, featuring a negative edge trigger type and asynchronous reset. It operates at a maximum frequency of 107MHz and is packaged in a surface-mount SO package. The device is designed to function within a tempera

Motorola, Inc

Conn Unshrouded Header HDR 74 POS 2.54mm Solder ST Thru-Hole

Tyco Electronics

The LCW-135-20-L-S-230-RP is a 35-contact HDR wire-to-board header from Samtec, designed for through-hole mounting with a right-angle body orientation. It features a terminal pitch of 2.54mm and a termination method of solder. The header operates within a

Samtec

Single Zener Diode, 190V nominal voltage with 5% tolerance, offers 5000mW maximum power dissipation. This surface-mount component features a 2-pin SMB (DO-214AA) plastic package with J-lead configuration. Maximum reverse leakage current is 0.5 uA, with a

ATMEL Corporation

This 5-pin box mount connector features a circular body with a straight orientation and a crimp termination method. It has a maximum operating temperature range of -55 to 125`C and a maximum voltage rating of 1250VDC or 900VAC. The connector is designed f

Amphenol

This SMD resistor features a 1.47K ohm resistance value with a 5% tolerance. It is a wirewound device with a rectangular package shape and a surface mount package type. The resistor has a maximum operating temperature of 275 degrees Celsius. It is not a cu

Riedon