Module DC-DC 48VIN 2-OUT 12V/-12V 1.25A 30W 8-Pin Case J

Universal Microelectronics

Straight, panel mount RF coaxial adapter with 50 Ohm impedance. Features a zinc body with nickel plating and gold-plated center contacts made of bronze. Dielectric and insulation material is polyethylene. This adapter is designed for bulkhead mounting and

Tyco Electronics

Dual 12-bit Digital-to-Analog Converter (DAC) with serial SPI and I2C interface. Features a 2.7V to 5.5V single supply voltage range and 4.4es settling time. Integral nonlinearity is 2.5 LSB. Operates from -40`C to 125`C. Packaged in an 8-pin TSOT surfa

Linear Integrated Systems

The VI-B6B-CW-F2 is a 200V 1.05A DC/DC converter with 90% efficiency. It features overvoltage protection, overcurrent protection, overtemperature protection, and short-circuit protection. The converter is packaged in a full brick format and is mounted thro

VICOR

The P0805Y4000BBW is a surface mount resistor with a 400 ohm resistance value and 0.1% tolerance. It has a maximum operating temperature of 155 degrees Celsius and is rated for a maximum voltage of 150 volts. The resistor is made with thin film technology

VISHAY

This unshrouded header features 2 contacts with a terminal pitch of 2.54mm and a right angle body orientation. It is designed for through hole mounting and has a maximum current rating of 3A per contact. The operating temperature range is -55`C to 105`C.

Samtec