Surface mount fixed inductor featuring 0.33eH inductance with a 10% tolerance, tested at 25.2MHz. This wirewound chip inductor utilizes a polymer core and offers a 10Q-factor at 25.2MHz, with a self-resonant frequency of 200MHz. It supports a maximum DC c
SMA jack RF connector uses a straight bulkhead configuration for RG174, RG188, and RG316 coaxial cable. The connector has 50 ohm impedance, standard polarity, and a crimp cable entry with crimp-and-solder pin entry. It is rated to 11 GHz with 1.2 VSWR and
16-Bit HCS12 Microcontroller IC featuring a 25MHz core frequency and 128KB FLASH memory. This surface mount device offers 35 programmable I/Os, 8 timers/counters, and integrated peripherals including POR, PWM, and WDT. Interfaces supported include SPI, S
The UT-1A resistor is a wirewound, through-hole device with a resistance value of 3.09 ohms and a tolerance of 5%. It has a maximum voltage rating of 52 volts and operates over a temperature range of -55`C to 275`C. The resistor is available in a silicon
Riedon
Реклама на сайте
Datasheet's на KAZUS.RUN
• 15.000.000 компонентов
• 300.000 поисковых запросов
• 500.000 закачек PDF в месяц
• 700.000 пользователей