This 9-position 2-row through hole D-subminiature connector features a current rating of 5A and is rated for operation between -50`C and 100`C. The connector is water resistant and dust tight, meeting IP66 standards. It is available in a packaging tray w

NorComp

ASSMANN WSW A-DS Series Through Hole Solder D-sub Connector Plug, 9 Way, 250 V ac, 3A

Assmann

Cap Tant Solid 39uF 20V 10% (7.34 X 17.42mm) Axial (1%FR) 1.4 Ohm 125`C Bulk

KEMET

This 6-pin VDFN EP MEMS oscillator features a standard frequency of 98.304 MHz with a frequency stability of a10 ppm. It operates within a voltage range of 2.25 to 3.6V and has a temperature range of -20 to 70`C. The device is designed for surface mount

ATMEL Corporation

The GE50A013202G6N010 is a nitrogen mass flow controller with a stainless steel media path and a VCO male connection. It operates within a temperature range of 10 to 50`C and has a repeatability of a0.3. The device is powered by a supply voltage range of

MKS Instruments

The Murata LQW2BHNR27J03K is a general purpose inductor with a nominal inductance of 0.27uH and a minimum quality factor of 15. It has a maximum rated current of 0.19A and operates at frequencies up to 10MHz. This surface mount inductor is available in the

muRata