The MAX293ESA+T is a single-channel amplifier from Maxim, packaged in a lead-free SOIC package. It operates within a temperature range of -40`C to 85`C and is compliant with RoHS regulations. The amplifier requires a nominal supply voltage of 5V and a ma

Linear Integrated Systems

Equipment Wire 1Conductors 20AWG 0.96mm Copper Gray 1000VAC

Habia

4M-bit NOR Flash memory with a parallel interface, offering 512K words x 8 bits. Features a 120ns maximum access time and operates from a 2.7V to 3.6V programming voltage, with a typical 3.3V supply. Packaged in a 32-pin TSOP (Thin Small Outline Package) w

micron

The MAXQ610A-0000+ is a 64KB FLASH microcontroller with a 16-bit SPI and UART interface operating at up to 12MHz. It is available in a 60-pin module package and is RoHS compliant. The device features a watchdog timer, brown-out detect/reset, and power-on r

Linear Integrated Systems

220-position, 2-row card edge connector with 0.03-inch pitch, designed for 0.062-inch thick cards. Features gold-plated bronze contacts and a black polymer housing with UL94 V-0 flammability rating. Through-hole mount termination supports solder connection

MOLEX

The VE-BWY-CX is a 3.3V 15A 50W full brick DC/DC converter from Vicor. It features a high efficiency of 90% and is equipped with overvoltage protection, overcurrent protection, overtemperature protection, and short-circuit protection. The converter operate

VICOR